2021-05-07 10:53:49 Ftherm Scraped Surface heat exchanger 857


Fouling is a major problem in heat transfer technology. Fouling occurs when fluids degrade near the tube wall and layers of solids deposit or stick to the tube wall. These layers work as an insulator for heat transfer, causing performance to drop. Another form of fouling is crystallisation where, due to cooling or increasing concentration, components in the fluid change to the solid state and deposit on the heat exchanger surface.

To maintain heat transfer high these fouling layers need removal and that is where scraping of the heat transfer surface is required for optimal performance and increase ‘up time’.

Scraped surface heat exchanger-Ftherm-Votator-Contherm-Terlotherm-SSHEs


In general, the more viscous the fluid, the lower the heat transfer is. This means that very viscous fluids require a very large heat transfer area. Scraped surface heat exchanger-Votators vigorously mix the fluid, which helps to move the fluid to and from the heat exchange surface. This increases heat transfer rates, so the total area required for heat exchange is reduced.

Ftherm Machinery SOLUTIONS

For difficult heat transfer applications, with high viscosities and where fouling can become a problem, the preferred option is a scraped surface heat exchanger. Scraped surface heat exchanger-Votators keep heat transfer high and the heat transfer surface is constantly cleaned.

Ftherm Machinery offers four technologies for scraped surface heat transfer: the Ftherm X Series, A Series, K Series and T Series which rotates, each designed for specific needs.